Request a quote

Foil-laminated vs poly-coated paper: which barrier for your pack?

Both turn paper into a barrier. Foil protects more; a polymer coating costs less protection and seals more easily. Neither is compostable.

Operator at a lamination machine with a kraft reel and a roll of film at a Bollant unit

Choose foil-laminated paper where the contents need a strong barrier against moisture, light and loss of aroma, as in many powder, pharmaceutical and cosmetic packs. Choose poly-coated paper where a moisture and grease barrier is enough and the pack should heat seal simply, at a lower level of protection than foil. Neither can be described as compostable, and both have limited recycling through paper streams.

What each one is

Foil-laminated paper bonds a thin aluminium foil to paper with an adhesive. Water-based adhesives such as PVA emulsions or dedicated laminating adhesives are widely used, because water can escape through the paper side. Poly-coated paper carries a polymer layer applied to the paper surface. Lamination bonds a separate film or foil; coating spreads a layer on and dries it. Both act as barriers and both change how the paper can be recycled. See lamination and coating.

Side by side

Foil-laminated and poly-coated paper compared
AspectFoil-laminated paperPoly-coated paper
BarrierStrong against moisture, light and aroma lossMoisture and grease; less than foil
Heat sealingOnly with a heat-seal layer in the constructionCan be heat sealable
PrintOn the paper side, or before laminationOn the paper side
Typical usesORS sachets, pharmaceutical packs, powders, cosmetic packsFood wraps, packs for oily or moist foods
RecyclingUsually not through standard paper streamsLimited; depends on the coating and local stream
CompostableNoNo

Choosing from the product outwards

  1. What does the product fear? Moisture uptake, as with ORS and many powders, points to foil. Grease soaking through a wrap points to a polymer coating.
  2. How long must it last? A long shelf life in humid conditions favours foil; short contact favours the lighter barrier.
  3. How is it sealed? Foil and plain paper do not seal on their own. Tell the supplier your sealing machine and its temperature range at the start.
  4. What will you claim? If the pack must be described as recyclable or compostable, neither construction gets you there; start from an uncoated paper and protect the product another way.

A note on ORS and pharmaceutical sachets

These are among foil-laminated paper’s common uses, because foil protects powders from moisture. For pharmaceutical or food packs, the declarations that apply depend on the whole structure: base paper, foil or coating, adhesive and inks. They are issued once confirmed for that material and use. Test filled packs before fixing the laminate. See packaging for pharmaceutical packers.

Wording the end of life

A user cannot separate foil or polymer from the paper, so do not describe these packs as compostable or biodegradable, and do not call them recyclable unless you have confirmed a local stream that accepts them. State the construction instead. See end-of-life claims you can defend.

What to send

The product and its shelf life, base paper GSM, the barrier you think you need, whether heat sealing is required and on which machine, reel or sheet size, artwork and volume. Bollant prints and finishes foil-laminated and poly-coated papers in its own units and makes adhesives for paper and foil at Nacharam. Request a quote.

Questions buyers ask

Is foil-laminated paper recyclable?

Usually not through standard paper streams, because foil and paper are bonded and must be separated before the fibre can be recovered.

Can poly-coated paper be heat sealed?

It can be heat sealable, depending on the coating. Tell the supplier your sealing machine and temperature range so the construction suits it.

Which is better for ORS sachets?

Usually foil-laminated paper, because foil keeps moisture out of hygroscopic powders. Confirm with filled-pack tests for your shelf life.

Is either one compostable?

No. Laminated or coated paper is not compostable, even when the base paper would be.

Which adhesive bonds paper to foil?

Water-based adhesives such as PVA emulsions or dedicated laminating adhesives are widely used. See choosing an adhesive.

Bollant Industries · Published 2026-11-21

Company footage · silent

Board converting and finished cartons

Send us your specification

Send the parameters you have. We confirm what we can make, the values we can agree in writing and the documents that go with them.