What pharmaceutical packers buy from Bollant
| Format | Used for | Agreed per order |
|---|---|---|
| Duplex board mono cartons | Cartons for medicines and other small packs | GSM, caliper, top-side shade, print |
| Card-backed blister packs | Retail and pharmaceutical packs that hang or stand | Card size and board, clear film, heat-seal method |
| Pouches and sachets | Oral rehydration salts and other powders | Size and style, laminate, fill weight |
| Foil-laminated paper | Pharmaceutical packs and pouches that need a strong barrier | Base paper, foil, heat-seal layer |
| Fibre drums | Pharmaceutical intermediates and other dry solids | Capacity, diameter, closure, liner |
Blisters: card first, then seal
Bollant’s blister range is card-backed: the plastic pocket is sealed to a printed board that carries the branding and often a hang hole. Push-through foil blisters for tablets are a different format; ask if your product needs one and the team confirms what can be made. The card carries a heat-seal coating and the blister flange is pressed onto it, so seal strength depends on the coating, the film and the sealing settings. Tell the team your sealing equipment, or whether packs should arrive sealed. Decide early whether card and blister must separate for recycling, because that changes the seal pattern.
ORS and powders: keep humidity out
Powders such as ORS take up moisture from the air, so the laminate has to keep humidity out for the product’s shelf life. Foil-containing laminates generally give the strongest barrier; paper and poly structures give less. Sachets suit single doses. Send the product, the shelf life you need and the filling machine’s sealing method, and run a filling trial before fixing the structure. See foil-laminated vs poly-coated paper.
Bulk intermediates in fibre drums
Fibre drums are wound from recycled paper made at Bollant’s own mills, with adhesive from its own adhesives unit, for dry powders, granules and solids. The drum body is not intended for direct food contact and a liner does not make it a liquid container. Choose a closure from how often the drum is opened and whether it must show tampering, and put the stacking requirement into the specification.
Documents, stated honestly
No certifications are listed on the site yet, and suitability for contact with a product is not given as a blanket label. Declarations are issued for a specific material and use once confirmed. Ask which documents apply to your product before you specify it, and keep the approved proof and specification sheet: line-off inspection checks each order against them. See the documentation checklist.



